Builder Turns ESP32 and LD2450 Into Radar Tracker

A hobbyist project combines an ESP32 microcontroller with an LD2450 microwave sensor to track people outdoors.

Updated on Nov. 22, 2026 in Semiconductors

A grey 3D-printed radar enclosure on a weathered wooden workbench outdoors, with a faint blue beam of light fanning into the air.
Hobbyist R1BBIT_ESP32 built a radar tracker pairing an ESP32 microcontroller with an LD2450 microwave sensor that follows up to three people at roughly 6-7 meters outdoors. AI Illustration. Upload story photo >

R1BBIT_ESP32 built a radar system using an ESP32 microcontroller and an LD2450 microwave sensor. The system tracks up to three people at once at a range of roughly 6-7 meters outdoors.

Why it matters

The project shows how inexpensive off-the-shelf microwave sensors can be paired with common microcontrollers for human detection. It offers a reference point for hobbyists and makers exploring low-cost presence sensing.

The LD2450 tracks up to three targets simultaneously over a detection range of approximately 6-7 meters, with a 1 mm plastic wall in front of its antennas. The source does not report measured accuracy or performance under differing conditions.

The players

R1BBIT

R1BBIT is a hobbyist electronics project creator that publishes builds, bills of materials, and code for DIY hardware.

The details

The builder combined an ESP32 microcontroller with an LD2450 Microwave Human Detection Radar, copy-pasting supplied code and following a short guide to set up the system. The enclosure was designed and 3D-printed, and the bill of materials, enclosure files, and code are available on the R1BBIT website.

The Tech Race

The LD2450 is a low-cost mmWave radar module that makes multi-target human presence sensing accessible to hobbyists without specialized equipment. This build places it in the growing community of makers adapting consumer-grade radar chips for home automation and monitoring.

Makers can build a multi-person presence detector for a few components and open-source code rather than buying a finished commercial product. The approach suits home automation projects, though builders should verify detection reliability in their own spaces before relying on it.

The takeaway

Low-cost radar modules are making multi-person sensing a practical weekend project for hobbyists. Testing a sensor in your own environment remains the best way to judge whether it fits your needs.

Further reading

Explore more on Semiconductors for context on the chips behind projects like this.

Source note: This article includes information reported by XDA-Developers.