ESPHome Enables Local Control of Emporia Vue Monitors
A community firmware project lets owners run Emporia Vue energy monitors without relying on the company's cloud service.
Updated on Nov. 18, 2026 in Electric Vehicles

Live Poll
Would you trust a local system over a company cloud for your home energy data?
An ESPHome firmware project now enables local mode on Emporia Vue energy monitors, removing the dependency on Emporia's cloud. The GitHub-hosted component is released under the GNU General Public License v3.0.
Why it matters
Local control lets households keep electricity monitoring data on their own network rather than sending it to a vendor cloud. It also brings Vue 2 and Vue 3 owners a route to customization that the manufacturer does not provide.
The Emporia Vue 3 tracks up to 16 electricity circuits using current transformer clamps and an ESP32 for wireless communication. The reported C$1,243 total electricity cost, C$270 for EV charging and C$263 for heat pumps comes from a single household's figures.
The players
Emporia Energy
Emporia Energy is the maker of the Vue energy monitors, whose cloud-dependent design this project works around.
ESPHome
ESPHome is an open-source firmware framework that turns microcontrollers such as the ESP32 into configurable smart-home devices.
The details
Users open the monitor and connect to test points linked to the ESP32 serial and boot pins, then back up existing firmware with a USB-to-serial adapter before installing ESPHome. The repository includes the ESPHome component, YAML configurations, firmware files and supporting tools, with a standard I2C implementation that works with stock SAMD09 firmware and an optional SPI implementation that requires matching custom firmware.
Timeline
Community reverse engineering of the Vue 2 began in 2021.
The article on the ESPHome local-control project was published on November 18, 2026.
Roadmap
The project sits within a wider movement of home-energy owners using open-source ESP32 firmware to pull data off commercial monitors. It follows the community reverse-engineering of the Vue 2, which began in 2021, and extends that work to the newer Vue 3.
Owners of compatible Emporia Vue monitors can add local control and keep energy data on their own network instead of Emporia's cloud. Installing the firmware requires opening the unit and connecting a USB-to-serial adapter, so the change is practical mainly for hands-on users.
The takeaway
Local-control firmware gives Emporia Vue owners a way to keep energy data on their own network. Anyone considering the change should back up existing firmware before flashing the device.
Further reading
Explore more on Electric Vehicles and how home charging and energy monitoring fit into the transition.
More information
The ESPHome Emporia Vue local-mode project repository contains the component, YAML configurations and firmware files.
Source note: This article includes information reported by Electronics For You - Official Site ElectronicsForU.com.
Live Poll
Would you trust a local system over a company cloud for your home energy data?







