LuwuDynamics Unveils RIG-TARS Desktop Robot
The wheelless, three-column robot kit is priced at US$99 and can be configured into four different forms.
Updated on Nov. 16, 2026 in Robotics

LuwuDynamics has unveiled RIG-TARS, a desktop robot built around an ESP32-S3 microcontroller with a three-column articulated body that moves without wheels. The kit sells for US$99 and includes all components except the enclosure, which buyers must 3D print.
Why it matters
The low price and open kit format offer hobbyists and developers a relatively affordable platform for experimenting with articulated, wheelless desktop robotics. Its combination of on-device wake-word detection and network-based speech processing reflects a practical design approach for consumer-scale robots.
RIG-TARS uses an ESP32-S3 chip with Wi-Fi and Bluetooth Low Energy, a six-axis QMI8658C IMU to track motion, and three serial servos on a UART link. Audio runs through an I2S interface, with wake-word detection on-device and speech recognition and generation handled over the network; independent performance measurements were not included in the source.
The players
LuwuDynamics
LuwuDynamics is the developer that unveiled the RIG-TARS desktop robot and its US$99 kit.
The details
LuwuDynamics has released RIG-TARS, a desktop robot whose three-column articulated body moves without wheels. Buyers receive a kit with all components except the enclosure, which must be 3D printed, and the robot can be assembled into four configurations: TARS, Puppy, Hover, and ARM.
Timeline
- Article on the RIG-TARS unveiling published 16 November 2026.
The Tech Race
RIG-TARS builds on the ESP32-S3, a low-cost microcontroller with integrated Wi-Fi and Bluetooth Low Energy, to bring networked articulated robotics into a US$99 hobbyist format. The design places it among a growing set of inexpensive, programmable desktop robots competing for developer attention.
Hobbyists and developers can buy the RIG-TARS kit for US$99 but must supply their own 3D-printed enclosure, which adds a fabrication step before the robot can be used. Its Wi-Fi and Bluetooth connectivity and selectable configurations let users reprogram the same hardware for different tasks.
The takeaway
A US$99 kit with reconfigurable forms gives hobbyists a low-cost route into articulated robotics, provided they are prepared to 3D print the enclosure themselves. Those interested should weigh the build effort against the kit's price before committing.
Further reading
For more on the hardware behind desktop machines like this, explore our Robotics coverage.
Source note: This article includes information reported by Electronics For You - Official Site ElectronicsForU.com.



