AMCM Links EOSPRINT With PanX Thermal Simulation

The integration lets metal additive manufacturing build data move directly into a thermomechanical simulation workflow.

Updated on Nov. 20, 2026 in Software

Isometric editorial illustration of a metal lattice component with heat-stress coloring rising from a bed of gray metal powder beside cylindrical filaments.
AMCM GmbH integrated its EOSPRINT build-preparation software with PanOptimization's PanX thermomechanical simulation platform to cut manual setup for metal additive manufacturing builds. AI Illustration. Upload story photo >

AMCM GmbH has integrated its EOSPRINT build-preparation software with PanX, a thermomechanical simulation platform developed by PanOptimization. The integration is designed to reduce manual setup for metal additive manufacturing builds.

Why it matters

Local heat accumulation in large and complex metal parts can cause distortion, residual stress, internal defects and difficult depowdering. Running thermomechanical simulation directly within the build workflow aims to counteract these problems before printing begins.

Build setup information moves through an openjz file containing geometries, build plate layout and processing parameters, while processing time per layer is retrieved through the EOSPRINT API. Completed analyses return optimized dwell times, compensated geometries and laser-power adjustments, but no measured accuracy figures were reported.

The players

AMCM GmbH

AMCM GmbH is a German company that produces large-format metal additive manufacturing systems, including the M 4K and M 8K.

PanOptimization

PanOptimization is the developer of PanX, a thermomechanical simulation platform used to model distortion and heat accumulation in metal printing.

Dyndrite

Dyndrite is a software company that develops build-preparation tools for laser powder bed fusion additive manufacturing.

Ansys

Ansys is a simulation software company whose thermal simulation capabilities were integrated into Dyndrite's LPBF Pro software in 2025.

The details

Build data is transferred from EOSPRINT into the simulation environment through the openjz file, and printer-specific information can be incorporated into the model. Optimized process information, including laser powers written as a TIFF image stack with a Smart Fusion Replay file, is written back into the same workflow.

Timeline

  1. 2025: Dyndrite partnered with Ansys to integrate thermal simulation into LPBF Pro build-preparation software.

  2. November 20, 2026: Article describing the AMCM and PanX integration was published.

The Tech Race

The integration follows Dyndrite's 2025 partnership with Ansys, which embedded thermal simulation into LPBF Pro build preparation. It signals a broader push among additive manufacturing vendors to fold physics-based simulation into the software that sets up each print.

Engineers running large or complex metal builds on EOS-compatible systems could set up thermally compensated prints with less manual configuration. The integration does not change printer hardware, so adoption depends on whether shops license and use both EOSPRINT and PanX.

The takeaway

Metal additive manufacturers adopting thermomechanical simulation should check whether their build-preparation software can exchange data with simulation platforms before investing in manual compensation workflows.

Further reading

Explore more software coverage for related developments in build-preparation and simulation tools.

Source note: This article includes information reported by 3D Printing Industry.