Qualinx Shows Ultra-Low-Power GNSS Receiver
The QLX3Gx, shown at electronica 2026 in Munich, operates at power levels as low as 1 mW and supports Galileo OSNMA authentication on-chip.
Updated on Nov. 17, 2026 in Semiconductors

Qualinx showcased its QLX3Gx ultra-low-power GNSS receiver at electronica 2026 in Munich. The chip is based on the company's reconfigurable GNSS receiver technology and integrates Galileo OSNMA authentication support on-chip.
Why it matters
Positioning navigation hardware that runs at about 1 mW addresses devices where battery life is a constraint. Software-adjustable reconfigurability, according to the extraction, allows the receiver's operation to be changed after manufacture.
The QLX3Gx operates at power levels as low as 1 mW, with 1 mW consumed in its 1 Hz cyclic mode, from a 1.0 to 1.9 V supply in a 5 x 5 mm QFN-40 package. Independent verification of these figures and commercial availability were not reported.
The players
Qualinx
Qualinx is a company that develops reconfigurable GNSS receiver technology for low-power positioning applications.
The details
The chip supports concurrent multi-constellation and simultaneous multi-band processing, including runtime switching between the L1 and L5 bands and concurrent L2CM and L5 operation. It integrates an ARM Cortex-M4 processor, memory, RF front-end components and GNSS processing on one chip, built on Qualinx's proprietary Digital RF architecture, and interfaces through SPI, UART and I2C.
Timeline
Qualinx showcased the QLX3Gx at electronica 2026 in Munich in November 2026.
The Tech Race
The QLX3Gx integrates Galileo OSNMA message authentication directly on-chip, extending a feature that Europe's Galileo system has built to counter spoofed satellite signals. Placing that authentication into a 1 mW receiver shows chipmakers moving the protection down into low-power devices.
Receivers at this power level could let wearables and sensors track location for longer between charges. Any product using the QLX3Gx would still need to be designed and sold by a device maker before consumers see the benefit.
The takeaway
Lower-power positioning chips that carry built-in signal authentication may make navigation more reliable in battery-limited devices. Readers tracking GNSS hardware should watch for availability and independent benchmarks of the QLX3Gx.
Further reading
For more on chip design and manufacturing, explore our Semiconductors coverage.
Source note: This article includes information reported by Everythingrf.



