ROHM Launches GaN-Ready TP-PFC Controller IC

The BM85060FV controller targets 99% system efficiency in 300 to 500 W AC-DC power supplies, with sales beginning November 2026.

Updated on Nov. 19, 2026 in Semiconductors

Isometric editorial illustration of an unlabeled power board with copper coils and a dark rectangular package in muted teal, oxblood, and cream.
ROHM Semiconductor launched the BM85060FV, a GaN-ready totem-pole power factor correction controller IC, with sales beginning in November 2026 for 300 to 500 W power supplies. AI Illustration. Upload story photo >

ROHM Semiconductor has developed the BM85060FV, a totem-pole power factor correction controller IC for AC-DC power supplies that operates in the MHz band with GaN HEMTs. Sales of the device began in November 2026, and it is available through DigiKey, Mouser and Farnell.

Why it matters

Consumer electronics and industrial equipment need more power in smaller packages, while stricter energy regulations push designers toward higher efficiency and lower no-load consumption. The controller is aimed at meeting both demands in the 300 to 500 W power range.

The BM85060FV draws 150 μA of no-load current, a 70% reduction compared with standard products, and supports system-level efficiency of 99% in 300 to 500 W-class supplies. Its performance figures are manufacturer-reported, and independent verification was not included in the announcement.

The players

ROHM Semiconductor

ROHM Semiconductor is a Kyoto, Japan-headquartered semiconductor manufacturer known for power devices and analog integrated circuits.

The details

The BM85060FV is a bridgeless TP-PFC controller that works with GaN HEMTs to reduce power loss and shrink the solution footprint. Its high switching frequency allows peripheral components to be miniaturized, and the chip includes a lightning surge protection circuit. A 330W output TP-PFC evaluation board featuring the device is also available.

Timeline

  1. November 19, 2026: ROHM announced development of the BM85060FV controller IC.

  2. November 2026: Sales of the BM85060FV began, with online sales following.

The Tech Race

The BM85060FV builds on the shift toward gallium nitride HEMTs in high-frequency switching, which lets power designers replace bulkier silicon-based circuits. It positions ROHM among suppliers competing to pair GaN transistors with controller chips for smaller, more efficient AC-DC power supplies.

Engineers designing 300 to 500 W AC-DC power supplies can evaluate the BM85060FV now, using the 330W evaluation board and distributors including DigiKey, Mouser and Farnell. The lower no-load current may reduce standby power draw in devices that spend long periods idle.

The takeaway

Lower no-load consumption and higher switching frequency are becoming central design targets for power supplies, and devices like the BM85060FV show how controller chips are adapting to those requirements. Designers weighing GaN-based power stages should compare efficiency and standby figures across suppliers before selecting components.

Further reading

Explore more on Semiconductors coverage for related chip developments.

Source note: This article includes information reported by The Manila times.