Open-Source IRis Remote Learns Signals From Other Remotes

A programmable infrared device built by Nicolas Ruiz Neiman can copy and replay commands from existing remote controls.

Updated on Nov. 16, 2026 in Remote Work

Bold flat-color editorial illustration of two matte-black handheld devices side by side, joined by a thin arc of infrared-toned glow, on a red and cream field.
Nicolas Ruiz Neiman released IRis, an open-source programmable infrared remote that learns and replays signals from existing remote controls under a GPL-3.0 license. AI Illustration. Upload story photo >

Nicolas Ruiz Neiman developed IRis, a programmable infrared remote that learns signals from other remote controls. The device uses an ESP32-WROOM-32 board, a 1.3-inch OLED screen and five buttons.

Why it matters

The project shows how a single handheld device can consolidate control of multiple infrared-enabled appliances without relying on proprietary hardware. Its open firmware under the GPL-3.0 license lets other builders adapt it for their own needs.

The device is powered by an 18650 lithium-ion cell with a boost converter set to 5V, and its firmware decodes NEC, Samsung, Sony SIRC, RC5 and JVC signals. Real-world performance beyond NEC remotes and a range of about two metres remains unverified.

The players

Nicolas Ruiz Neiman

Nicolas Ruiz Neiman is the developer who designed and built the IRis programmable infrared remote.

The details

IRis reads signals from existing remotes using an IR receiver and transmits stored signals through infrared LEDs. Users can import remote definitions in the .ir format from an optional microSD card, and a Be Gone mode sends power-off codes for devices in a chosen category. The firmware is written in C++17 and built with PlatformIO using the Arduino-ESP32 framework.

Timeline

  1. The project's publication date was not specified in the source material.

Roadmap

IRis builds on decades of standardized infrared protocols such as NEC, Samsung, Sony SIRC, RC5 and JVC that have long governed television and appliance remotes. By decoding these protocols in an open-source, learning device, it departs from the single-brand and proprietary universal remotes that have dominated the category.

IRis could let households replace several appliance remotes with one device that learns existing commands. Users would still need to confirm that their own remotes use a supported protocol, since testing so far covers only NEC remotes.

The takeaway

Open-source hardware lets builders adapt consumer electronics to their own needs. Anyone considering a similar project should verify protocol compatibility with the specific remotes they plan to replace.

Further reading

For more on distributed work tools and home-office technology, see Remote Work.

Source note: This article includes information reported by Electronics For You - Official Site ElectronicsForU.com.