SparkFun Launches IoT RedBoard With ESP32-P4

The development board pairs Espressif's ESP32-P4 and ESP32-C5 chips for application processing and wireless communications.

Updated on Nov. 12, 2026 in Consumer Electronics

Close photograph of a small green development circuit board on a grey workbench, copper traces and pin headers visible under soft daylight.
SparkFun has launched its IoT RedBoard, built on Espressif's ESP32-P4 and ESP32-C5 chips, with a Wi-Fi and BLE version priced at US$49.95. AI Illustration. Upload story photo >

SparkFun has introduced the IoT RedBoard, a development board built around Espressif's ESP32-P4 and ESP32-C5 chips. A separate Power-over-Ethernet variant of the RedBoard is also offered, and the Wi-Fi/BLE version is listed at US$49.95.

Why it matters

The board combines a 400 MHz application processor with dedicated wireless hardware, giving developers an integrated platform for connected projects. Its launch also highlights that upstream Arduino ESP32 Core support for the ESP32-C5 is still in development.

The board runs a 400 MHz ESP32-P4 processor alongside 32MB of PSRAM and 16 MB of flash, with a dual-band Wi-Fi 6, Bluetooth 5 LE and Zigbee ESP32-C5 handling wireless. Standard Arduino ESP32 Core 3.3.12 does not natively support the ESP32-C5, and upstream support is still in development.

The players

SparkFun

SparkFun Electronics is a United States-based maker of open-source hardware, development boards and electronics education kits.

Espressif Systems

Espressif Systems is a Shanghai-based company that designs the ESP32 family of low-power Wi-Fi and Bluetooth microcontrollers widely used in IoT devices.

The details

The IoT RedBoard includes MIPI connectors for cameras and displays, two USB-C ports, a Qwiic connector and RedBoard/R3 expansion headers. A JST connector supports a single-cell LiPo battery with onboard charging and battery monitoring, and the board comes preloaded with MicroPython while supporting ESP-IDF and the Arduino IDE.

The Tech Race

The RedBoard extends Espressif's ESP32 family by splitting the workload between the ESP32-P4 application processor and the ESP32-C5 wireless chip. It follows a pattern of hobbyist boards adopting each new ESP32 generation as Espressif releases it.

Developers building connected projects can use the board's Wi-Fi 6 and Bluetooth 5 LE support, but the ESP32-C5 needs SparkFun's temporary software patch until upstream Arduino ESP32 Core support arrives. The US$49.95 Wi-Fi/BLE version lowers the entry cost for prototyping camera and display projects.

The takeaway

Makers planning ESP32-C5 projects should verify toolchain support before buying, since the standard Arduino core does not yet recognize the wireless co-processor. Checking SparkFun's patch notes and the upstream Arduino ESP32 Core status will avoid build issues.

Further reading

Explore more Consumer Electronics coverage for context on connected development hardware.

Source note: This article includes information reported by Electronics For You - Official Site ElectronicsForU.com.