Fraunhofer to Show Shape Dithering at Formnext

Fraunhofer IGD is set to present a geometric method for reducing staircase artifacts in voxel-based 3D printing at Formnext 2026.

Updated on Nov. 14, 2026 in Quantum Computing

Fraunhofer to Show Shape Dithering at Formnext

Fraunhofer IGD will present Shape Dithering, a patented geometric method that distributes quantization errors across a surface to reduce visible staircase patterns in 3D printing. The institute and IGCV plan to demonstrate it with a cast aluminum part made from a binder-jetted mold.

Why it matters

Discretizing curved and inclined geometries in voxel-based printing creates visible artifacts that typically require post-processing. The method is expected to reduce that work or allow higher printing speeds.

The demonstration uses a mold built in 300-micrometer layers and a cast aluminum part poured at 720 °C from AlSi7Mg0.3, with the mold containing sections both with and without Shape Dithering. The source does not quantify the surface-quality improvement or the post-processing reduction the method may deliver.

The players

Fraunhofer IGD

The Fraunhofer Institute for Computer Graphics Research IGD is a German applied research institute focused on visual computing and simulation.

IGCV

The Fraunhofer Institute for Casting, Composite and Processing Technology IGCV is a German research institute specializing in casting and materials processing.

The details

Shape Dithering distributes quantization errors across a surface in a controlled manner rather than letting them accumulate into visible patterns. Fraunhofer IGD and IGCV will show the effect on a cast aluminum part produced with a commercial furan no-bake binder system.

Timeline

  1. Formnext 2026: Fraunhofer IGD presents Shape Dithering and related additive manufacturing software.

The Tech Race

Voxel-based additive manufacturing has long struggled with staircase artifacts on inclined and curved surfaces, a limitation Shape Dithering seeks to address through geometric error distribution. The approach positions Fraunhofer's software and process work against other efforts to improve surface fidelity in metal 3D printing.

If the method works as projected, 3D-printed parts with curved or angled surfaces could require less post-processing to achieve a smooth finish. Users may also benefit if printing speeds rise without a corresponding loss of surface quality.

The takeaway

Surface artifacts in voxel-based 3D printing may be reducible through geometry-aware error distribution rather than only finer voxels. Watch for measured post-processing and speed results when the demonstration is presented at Formnext 2026.

Further reading

Explore more in our Quantum Computing coverage.

Source note: This article includes information reported by ETMM.