Vishay Extends Snap-In Capacitors to 550 V, 600 V

The 259 PHM-SI series expansion lets high-voltage designers use fewer capacitors in series.

Updated on Nov. 17, 2026 in Appliances

Isometric editorial illustration of three plain blue-sleeved cylindrical capacitors with bare snap-in terminals standing on a flat cream base, illustrating a high-voltage component expansion.
Vishay Intertechnology extended its 259 PHM-SI snap-in aluminum capacitor series with 550 V and 600 V ratings, letting designers use fewer capacitors in series on 800–1100 V DC buses. AI Illustration. Upload story photo >

Vishay Intertechnology has extended its 259 PHM-SI series of snap-in power aluminum capacitors with 550 V and 600 V ratings. The devices allow designers to use fewer capacitors in series than the three 400 V to 450 V units traditionally used for DC bus voltages from 800 V to 1100 V.

Why it matters

Fewer series capacitors reduce component counts, board space requirements and costs while improving reliability in high-voltage designs. The expansion gives engineers another option for power electronics operating in demanding voltage ranges.

The new capacitors come in 330 µF and 470 µF values at 550 V and 600 V, with ripple current ratings from 2.14 A to 2.58 A and a useful life of more than 3000 h at +105 °C. Production quantities are available now, with lead times of 12 to 18 weeks depending on region.

The players

Vishay Intertechnology, Inc.

Vishay Intertechnology is a manufacturer of discrete semiconductors and passive electronic components, including capacitors used across industrial and power electronics applications.

The details

The 550 V and 600 V configurations come in a cylindrical aluminum case insulated with a blue sleeve, with 3-pin keyed polarity snap-in terminals. The 330 µF devices fit a 35 mm x 45 mm case, while the 470 µF and 390 µF devices fit a 35 mm x 55 mm case, and the devices are RoHS-compliant.

Timeline

  1. November 17, 2026: Vishay announced the extension of the 259 PHM-SI series capacitors.

  2. Lead times for production quantities run 12 to 18 weeks, depending on region.

Appliances Context

Higher-voltage capacitor ratings matter most for the power-conversion stages inside large appliances and HVAC equipment, where DC bus voltages have been climbing. Fewer series-connected parts in those stages can shrink the power board and simplify the design of the appliances consumers buy.

Appliance makers and repair technicians may see these capacitors in future power boards for higher-voltage equipment. Consumers are unlikely to notice a direct change in product price or performance from this component announcement alone.

The takeaway

Engineers designing for 800 V to 1100 V DC buses can potentially reduce capacitor count by using the new 550 V and 600 V parts. Checking the datasheet ratings against your own operating temperature and ripple requirements is the next practical step.

Further reading

Explore more appliance news and component trends affecting home electronics.

More information

Review the 259 PHM-SI product datasheet from Vishay Intertechnology for full specifications.

Source note: This article includes information reported by The Manila times.