FAA Proposes Landing Gear Fix for Dassault Jets
The proposed directive covers 683 U.S.-registered Falcon 50 and 2000 series aircraft over a torque link manufacturing defect.
Updated on Nov. 13, 2026 in Auto Parts

The Federal Aviation Administration has proposed an airworthiness directive for Dassault Falcon 50, 2000 and 2000EX aircraft over a defect in the main landing gear. The FAA estimates up to 178 aircraft have affected components installed.
Why it matters
A manufacturing quality issue caused high-temperature oxidation in the torque links, which could lead to landing gear failure if not addressed. The proposal would require operators to replace affected assemblies and restrict installation of certain affected parts across the United States fleet.
The FAA proposal covers 683 U.S.-registered aircraft, with 36 labor hours at $85 per hour plus up to $300,000 in equipment needed per replacement. The maximum estimated compliance cost across 178 aircraft is approximately $53.9 million.
The players
Federal Aviation Administration
The U.S. federal agency responsible for regulating civil aviation safety, including issuing airworthiness directives for aircraft and components operating in the United States.
Dassault
A French aerospace manufacturer known for its Falcon business jet family, including the Falcon 50 and 2000 series aircraft covered by the proposal.
European Union Aviation Safety Agency
The European Union's agency responsible for aviation safety regulation, which issued a January directive addressing the same landing gear defect.
The details
The defect involves high-temperature oxidation in upper and lower torque links of certain main landing gear assemblies, traced to a manufacturing quality issue. Dassault indicated warranty coverage could reduce or eliminate some expenses for certain operators, and the European Union Aviation Safety Agency issued a related directive in January.
Timeline
January 2026: EASA issued a directive addressing the same landing gear defect.
November 12, 2026: The FAA published the proposed airworthiness directive.
December 28, 2026: Deadline for public comments under docket FAA-2026-13805.
Roadmap
The FAA proposal follows the same airworthiness directive process the agency uses to correct unsafe conditions in type-certificated aircraft, mirroring a January directive from EASA on the same landing gear defect. The move signals regulators on both sides of the Atlantic treating the torque link oxidation as a shared fleet-wide safety concern rather than an isolated issue.
Operators of affected Falcon jets could face replacement costs of up to $303,060 per aircraft, though warranty coverage may reduce or eliminate some expenses. The proposal would require replacing affected landing gear assemblies with serviceable equipment and restrict installation of certain affected parts.
The takeaway
Owners and operators of Falcon 50 and 2000 series jets should watch for the final directive and check whether warranty coverage applies to their landing gear. Early review of maintenance records can help plan for possible replacement timing.
What happens next
Public comments on the FAA proposal are accepted through December 28, 2026, under docket FAA-2026-13805.
Further reading
Explore more on Auto Parts coverage for context on aircraft component regulation.
Source note: This article includes information reported by AVweb.










