FAA Expands Lycoming Engine Piston Pin Inspections
A new airworthiness directive requires inspections and replacements for certain Lycoming engine piston pins on U.S.-registered aircraft.
Updated on Nov. 9, 2026 in Car Maintenance

The Federal Aviation Administration issued airworthiness directive AD 2026-22-13 on Monday, expanding required inspections and replacements of certain Lycoming engine piston pins. The directive supersedes an August 2026 order and adds several engine models, including O-320 and IO-320 variants, and takes effect Nov. 24.
Why it matters
The FAA said the affected pins have been associated with metal contamination in engine oil and engine failures. The directive covers approximately 957 engines on U.S.-registered aircraft, making owners and operators responsible for compliance within tight timeframes.
The directive covers LW-13445 piston pins manufactured between Jan. 7, 2021, and Dec. 15, 2025, or pins with undeterminable dates. Operators must complete oil inspections within five hours of the effective date and replace certain pins within 25 hours, depending on engine and operating hours.
The players
Federal Aviation Administration
The FAA is the U.S. federal agency responsible for regulating civil aviation safety, including issuing airworthiness directives that require corrective action on aircraft and engines.
Lycoming
Lycoming is an American aircraft engine manufacturer whose piston engines power many general aviation aircraft.
The details
Affected operators must conduct oil inspections within five hours of the directive's effective date and replace certain pins before further flight or within 25 hours, depending on the engine and operating hours. Some expenses may be covered under warranty, and the action is separate from an earlier directive addressing Lycoming connecting rod assemblies.
Timeline
Jan. 7, 2021: Earliest manufacturing date for affected piston pins
Dec. 15, 2025: Latest manufacturing date for affected piston pins
August 2026: Earlier order superseded by the new directive
Nov. 9, 2026: FAA issued the expanded directive
Nov. 24, 2026: Directive takes effect
Roadmap
The directive follows the FAA's established airworthiness directive process under 14 CFR Part 39, which compels owners to address safety defects in certified engines. It expands an earlier August 2026 order and runs alongside a separate directive on Lycoming connecting rod assemblies, reflecting repeated regulatory attention to Lycoming engine reliability.
Owners of affected Lycoming-powered aircraft must schedule oil inspections within five hours of the directive's effective date, with pin replacements due before further flight or within 25 hours. Warranty coverage may offset part of the estimated $4,325 per-engine cost.
The takeaway
Aircraft owners with Lycoming engines should check manufacturing dates on their piston pins now, since the five-hour and 25-hour compliance windows leave little room for delay.
Further reading
Explore more on Car Maintenance for related guidance on keeping vehicles and engines serviced.










