Open-Source Floppy Reader Lets Users Copy Disks Over Wi-Fi
Hardware hacker BigCrimping has released floppy3.5, a freely available open-source device for reading 3.5-inch floppy disks over a network.
Updated on Nov. 21, 2026 in Computers

The device, named floppy3.5, reads and copies 3.5-inch floppy disks and can be used over a network or directly via USB cable. Its complete design files, including 3D-printable enclosure data and a custom circuit board, are published openly on GitHub.
Why it matters
Legacy storage media remains in older archives and equipment, and a low-cost, open design gives users a way to recover data without buying proprietary hardware. The approach also makes the device's internals available for others to inspect, modify, and build upon.
The custom board uses an RP2354A microcontroller paired with an ESP32-S3 bridge, and a monochrome LCD shows sector and cylinder counts, a good/bad sector map, and file counts. Performance benchmarks and compatibility beyond the default FAT12 filesystem were not included in the source material.
The players
BigCrimping
BigCrimping is a hardware hacker who created and open-sourced the floppy3.5 device.
Greaseweazle
Greaseweazle is an open floppy drive controller protocol and hardware project used for low-level disk communication.
The details
The READ button scans a disk's files and the SAVE button dumps them to an optional microSD card, while a built-in web interface allows control over the network. The device communicates with drives using the Greaseweazle protocol, which manages the drive's wire signals directly instead of relying on a conventional floppy controller, a choice that reduces hardware cost and gives full control over the drive.
Timeline
• Article on the floppy3.5 release published November 21, 2026.
The Tech Race
The floppy3.5 builds directly on the Greaseweazle protocol, which replaces conventional floppy controller chips with direct drive-signal control. By packaging that approach into a standalone networked device, the project extends a niche open tool toward self-contained retro-media recovery hardware.
Users with old 3.5-inch floppy disks can copy their contents to a computer or SD card over a home network without needing a legacy floppy controller. Because the design files are free, hobbyists can also build their own unit using a 3D printer and the published circuit board data.
The takeaway
Open hardware projects like floppy3.5 show how legacy storage can remain accessible when designs are shared publicly. Readers with old disk collections can consider whether a DIY reader fits their needs before relying on proprietary alternatives.
Further reading
Explore more hardware and storage coverage in the Computers section.
Source note: This article includes information reported by Tom's Hardware.



