Engineer Runs Doom on USB Drive LCD

A hobbyist reverse-engineered a MOVESPEED flash drive's display to play the classic shooter and released the open-source project.

Updated on Nov. 16, 2026 in Computers

Close view of a matte-black USB flash drive on a workbench, its back open to a green circuit board with probes touching exposed pads beside a glowing small color display.
Aaron Christophel ran Doom on the built-in color LCD of a MOVESPEED MSSU10 USB flash drive, then released the open-source code and firmware. AI Illustration. Upload story photo >

Aaron Christophel ran the game Doom on the built-in color LCD of a MOVESPEED MSSU10 USB flash drive. He released the open-source project with its code and prebuilt firmware.

Why it matters

The project shows that a low-cost storage device's display can be repurposed through firmware access and an open debug port. Its release may encourage similar hacks on consumer hardware.

The 128GB model's display runs on a C*Core CCM4101 microcontroller with 2MB of flash and a 428 x 142 color LCD, and its measured clock of 40.2 MHz falls well short of the declared 200 MHz. The stub does not say whether the performance gap reflects a limit of the hardware or of the firmware.

The players

Aaron Christophel

Aaron Christophel is the hobbyist engineer who reverse-engineered the drive's display and released the open-source Doom project.

MOVESPEED

MOVESPEED is the manufacturer of the MSSU10 USB flash drive whose display was repurposed for the project.

The details

A probe attached to the drive's debug pads on the first try, allowing extraction of the display chip's firmware. The control script doomctl.py encodes key presses as timed storage transfers at five rate levels per direction, since the drive has no buttons, and the game runs at about 13 frames per second.

Timeline

  1. Article on the Doom-on-USB-drive project published November 16, 2026.

The Tech Race

The project treats a commodity flash drive as a general-purpose computing platform, extending a long line of hobbyist hacks of consumer electronics. It draws on an open debug port in a device sold for about 50 euros, a cost point that makes such repurposing accessible to many users.

Owners of similar USB drives with exposed debug ports could in principle repurpose their own devices, though the method requires probing hardware. The project is open-source, so the code and prebuilt firmware are available for those who want to try it on a compatible model.

The takeaway

Consumer storage devices can carry more capable hardware than their packaging suggests, and open debug ports can expose it. Readers interested in hardware tinkering can follow the released code to see how the display was controlled.

Further reading

Explore more hands-on projects in our Computers section.