Murata Launches Isolated DC-DC Converters for SiC

Murata Manufacturing Co., Ltd. has introduced its MGJ2T2 series of 2W isolated DC-DC converters designed for silicon carbide gate-drive applications.

Updated on Nov. 16, 2026 in Semiconductors

Bold flat-color editorial illustration of a navy rectangular power module on a cream board with a copper trace crossing a narrow isolation gap.
Murata Manufacturing introduced its MGJ2T2 series of 2W isolated DC-DC converters, rated for 8kVDC isolation, to control silicon carbide MOSFETs. AI Illustration. Upload story photo >

Murata Manufacturing Co., Ltd. introduced the MGJ2T2 series of isolated DC-DC converters. The 2W devices provide 8kVDC isolation and deliver +18V/-3V outputs to control SiC MOSFETs.

Why it matters

Fast switching in SiC-based power converters produces rapid voltage changes that can couple electrical noise across the isolation barrier. The MGJ2T2 series is designed to address that noise coupling with low isolation capacitance and high common-mode transient immunity.

The MGJ2T2 converters accept a 24V input and provide 8mm of creepage and clearance, with 6kVDC withstand testing across the isolation barrier. Murata's source specifications do not include independent verification of these figures or production volumes.

The players

Murata Manufacturing Co., Ltd.

Murata Manufacturing Co., Ltd. is a Japanese electronic components manufacturer known for passive components, power supplies and sensors used across consumer and industrial electronics.

The details

Murata's MGJ2T2 series uses proprietary Block-Coil technology, in which separate windings are formed on solid insulating formers to physically separate primary and secondary circuits while reducing capacitance between them. The series is rated for reinforced insulation at working voltages up to 800Vrms and basic insulation at 1600Vrms.

Timeline

  1. November 16, 2026: Publication of the article announcing the MGJ2T2 introduction

The Tech Race

The MGJ2T2 launch targets the gate-drive isolation demands created by silicon carbide MOSFETs in power conversion, a segment where switching speed has increased electrical noise coupling across isolation barriers. It positions Murata among component suppliers competing to serve the growing SiC power electronics market.

Engineers designing SiC-based power converters can use the MGJ2T2 series to supply isolated gate-drive voltages with specified insulation and noise immunity ratings. Product availability and pricing were not included in the source extraction, so buyers will need to confirm them directly with Murata.

The takeaway

Designers working with silicon carbide power devices should evaluate isolation capacitance and common-mode transient immunity alongside voltage rating when selecting gate-drive isolators. Confirming insulation specifications against the intended working voltage is essential before integrating any isolated converter.

Further reading

Explore more Semiconductors coverage for context on power devices like the MGJ2T2 series.

Source note: This article includes information reported by ELE Times.