Diodes Launches Automotive-Grade Hall Effect Current Sensors

The AHC1724Q and AHC1725Q sensors offer galvanically isolated AC and DC current measurement for automotive designs.

Updated on Nov. 16, 2026 in Automotive — General

Isometric editorial illustration of a thick copper busbar passing through a matte housing, separated by a clear gap from a thin insulated conductor loop.
Diodes Incorporated launched the AHC1724Q and AHC1725Q automotive-grade Hall effect sensors, which measure AC and DC currents up to ±50A with galvanic isolation. AI Illustration. Upload story photo >

Diodes Incorporated has launched the AHC1724Q and AHC1725Q, automotive-compliant Hall effect current sensors. The devices provide galvanically isolated AC and DC measurements of currents up to ±50A.

Why it matters

Isolated current sensing is a core requirement in electrified vehicle power systems, where high voltages must be measured safely without a direct electrical connection. The launch adds to the supplier options available to automotive engineers designing these systems.

The sensors measure up to ±50A across a 120kHz bandwidth with a 4.0µs response time and 2.0µs propagation delay. The copper path carries 1.2 milliohms of resistance and supports a maximum working voltage of 420V DC.

The players

Diodes Incorporated

Diodes Incorporated is a publicly traded U.S. semiconductor company that designs and manufactures discrete, analog and mixed-signal components used across automotive and industrial markets.

The details

Each sensor pairs a copper current path with a Hall sensor that measures the current flowing through it, keeping the measured path electrically isolated from the sensing circuit. The devices meet the basic insulation requirements of the UL 62368-1 safety standard.

Timeline

  1. Article about the sensor launch was published November 16, 2026.

Roadmap

The launch reflects the broader shift toward high-voltage electrified powertrains, where isolated current sensing is needed to monitor battery and inverter currents safely. Components meeting the UL 62368-1 insulation requirements give suppliers a recognized baseline for qualifying such parts in vehicle designs.

For engineers and automakers, the sensors offer isolated AC and DC current measurement up to ±50A at working voltages of 420V DC. Designs using these parts can rely on the stated UL 62368-1 insulation compliance when specifying high-voltage monitoring circuits.

The takeaway

Isolated current sensors that meet recognized safety standards are a practical building block for high-voltage vehicle systems. Engineers evaluating them should verify availability and qualification data directly with the manufacturer.

Further reading

Explore more developments in Automotive — General.

Source note: This article includes information reported by Electronics For You - Official Site ElectronicsForU.com.