Chitosan Coating Makes Wood Flame-Resistant

Researchers report a bio-based intumescent coating built from chitosan and eggshell powder that substantially slows wood combustion.

Updated on Nov. 16, 2026 in Chemistry

Isometric editorial illustration of two wooden blocks on a slate surface, one bare and one coated with a puffed, bubbled cream-and-oxblood crust beside a dish of pale powder.
Researchers report a bio-based chitosan and eggshell coating that raised wood's limiting oxygen index from 27% to 46% and earned a UL-94 V-0 rating. AI Illustration. Upload story photo >

Researchers have developed a bio-based intumescent flame-retardant coating for wood combining chitosan and calcined eggshell powder with ammonium polyphosphate and melamine. The coating raised the wood's limiting oxygen index from 27% to 46% and achieved UL-94 V-0 classification.

Why it matters

Conventional flame-retardant coatings often rely on halogenated or purely synthetic additives that raise environmental and health concerns. A biodegradable alternative built partly from domestic waste could offer a more sustainable route for treating wood.

Cone calorimetry measured a 42.04% reduction in peak heat release rate and a 53.29% reduction in total heat release compared with uncoated wood, based on laboratory samples. The study does not report how these results hold up under long-term weathering or in full-scale fire conditions.

The details

The coating combines chitosan, a biodegradable biopolymer, and eggshell powder sourced from domestic waste with ammonium polyphosphate and melamine. Orthogonal experiments identified an optimum formulation ratio of APP:MEL:CTS:CES at 15:10:5:1, and burned samples formed a char layer rich in carbon, phosphorus and calcium.

The Big Picture

The coating offers a bio-based alternative to halogenated flame retardants, which have long dominated conventional wood coatings because of their effectiveness despite environmental and health concerns. Its char layer chemistry places it within a growing research push to replace synthetic phosphorus and halogen additives with renewable biopolymers.

If commercialized, a chitosan-based coating could give builders and manufacturers a way to treat wood for fire resistance using renewable, waste-derived inputs. The stub does not indicate when or whether such products would reach the market.

The takeaway

Renewable biopolymers such as chitosan are emerging as candidates for replacing synthetic fire-retardant chemistry in building materials. Readers following material safety or sustainable construction can watch whether laboratory results carry over to real-world products.

Further reading

Explore more on this topic in the Chemistry section.