Silicon Carbide Boosts Brake Pad Force in Study

Researchers found that adding silicon carbide nanoparticles to disc brake pads can improve braking performance in lab testing.

Updated on Nov. 14, 2026 in Car Maintenance

Photograph of a bare brake pad friction block resting against the edge of a cast iron brake rotor on a steel bench under soft daylight.
Researchers found that adding 0.5 percent silicon carbide nanoparticles to disc brake pads raised average brake force by up to 19 percent in lab tests. AI Illustration. Upload story photo >

A study evaluated four brake pad formulations containing silicon carbide as an abrasive additive at concentrations of 0, 0.5, 1.5, and 3 wt%. The 0.5 wt% formulation increased average brake force by up to 19% compared with unmodified pads.

Why it matters

Brake pad composition directly affects stopping performance and safety for drivers worldwide. The findings suggest nanoparticle additives could offer measurable gains in friction and heat resistance, though results come from controlled laboratory testing.

Testing used a 241 mm outer diameter, 19 mm thick grey cast iron disc across silicon carbide concentrations of 0, 0.5, 1.5, and 3 wt%. The 0.5 wt% formulation enhanced the friction coefficient, and samples showed fade resistance up to 130 °C.

The players

Scientific Reports

Scientific Reports is an open-access peer-reviewed journal published by Nature Portfolio that covers natural sciences and engineering research.

The details

Researchers incorporated silicon carbide nanoparticles into brake pads as an abrasive additive and tested them on a specialized rig. The silicon carbide-infused samples showed superior thermal stability and fade resistance up to 130 °C compared with unmodified pads.

Timeline

  1. The study was published in Scientific Reports on November 14, 2026.

Roadmap

Automakers and suppliers have spent decades replacing asbestos in brake friction materials with ceramic and organic alternatives. This nanoparticle study extends that search by testing whether silicon carbide can deliver higher friction and heat resistance than conventional fillers.

Brake pad formulation affects how quickly a vehicle stops and how well braking holds up under heat, which matters most for drivers who brake hard or descend long grades. The findings are from laboratory testing, so drivers should continue to follow manufacturer and mechanic recommendations for pad replacement.

The takeaway

Friction material chemistry remains an active area of research, and additive choices can change braking force and heat tolerance. Drivers should still rely on tested, manufacturer-approved pads when replacing brakes.

Further reading

For more on keeping your own brakes in shape, see Car Maintenance.

Source note: This article includes information reported by Nature.