Compulab Unveils IOT-GATE-IMX8PV2 Industrial Gateway
The fanless device pairs NXP's i.MX8M Plus processor with dual Gigabit Ethernet and optional Wi-Fi 6 and LTE connectivity.
Updated on Nov. 12, 2026 in Consumer Electronics

Compulab has detailed the IOT-GATE-IMX8PV2, a fanless industrial IoT gateway built around NXP's i.MX8M Plus processor. The device combines dual Gigabit Ethernet, optional Wi-Fi 6, and LTE connectivity in a 105 × 80 × 30mm aluminum enclosure.
Why it matters
The gateway targets industrial deployments that need compact, fanless hardware with multiple wired and wireless links and on-device processing for edge tasks. Its combination of real-time and inference capabilities addresses factory and infrastructure settings where space, heat and connectivity are constraints.
The gateway pairs a quad-core Cortex-A53 running up to 1.8GHz and a Cortex-M7 real-time core with a 2.3 TOPS neural processing unit and 2GB to 8GB of LPDDR4 memory. Independent performance measurements and final pricing have not been reported.
The players
Compulab
Compulab is an embedded computing company that designs and manufactures industrial single-board computers and IoT gateways.
NXP Semiconductors
NXP Semiconductors is a Dutch semiconductor company whose i.MX processor family is widely used in embedded and industrial devices.
The details
The IOT-GATE-IMX8PV2 uses a fanless design and draws between 2.5W and 8W, operating from -40°C to 80°C. Optional modules add Intel AX210 Wi-Fi 6 with Bluetooth 5.3, a Telit LE910 Cat-4 LTE modem with GPS, an optional 256GB M.2 NVMe drive, and a Nordic nRF52840 wireless mesh module supporting Bluetooth Mesh, Thread and Zigbee. The ETH0 port supports IEEE 802.3af Power over Ethernet, and the optional I/O configuration offers two isolated ports configurable for half-duplex RS485 or CAN-FD.
Timeline
Compulab detailed the IOT-GATE-IMX8PV2 on November 12, 2026.
The Tech Race
The IOT-GATE-IMX8PV2 is built on NXP's i.MX8M Plus processor, extending that chip family into ruggedized edge-gateway hardware. It reflects a broader push by embedded vendors to bundle on-device machine-learning inference with industrial connectivity.
For engineers and integrators, the gateway offers Power over Ethernet, isolated RS485 or CAN-FD interfaces and optional LTE or Wi-Fi 6 without a fan to maintain. Buyers should check configuration options, since memory, storage and wireless modules are chosen separately.
The takeaway
Embedded gateways that combine edge inference with multiple industrial interfaces are becoming a standard building block for connected factories and infrastructure. Teams evaluating such hardware should compare the actual module configurations and temperature ratings against their deployment environment.
Further reading
Explore more Consumer Electronics coverage to see how embedded and connected devices are reaching market.
Source note: This article includes information reported by LinuxGizmos.



