Spectrum Adds Onboard Averaging to 59xx Digitisers
A new firmware option performs summation averaging in the onboard FPGA for Spectrum Instrumentation's 59xx series digitisers.
Updated on Nov. 10, 2026 in Semiconductors

Spectrum Instrumentation has introduced a firmware option, named M2p.xxxx-spavg, that enables onboard summation averaging for its 59xx series digitisers. The option is available immediately from Vepac Electronics for new units and as a field upgrade for existing units.
Why it matters
Onboard averaging reduces the volume of data that must be stored or transferred for analysis, which can ease the load on acquisition systems handling high-repetition-rate signals. For engineers working on noisy measurements, it offers a way to improve resolution and signal-to-noise ratio directly in the instrument.
The 59xx series spans 24 PCIe card variants and 28 Ethernet-based instruments, with sampling rates from 5 MS/s to 125 MS/s at 16-bit resolution. PCIe cards stream data at up to 700 MB/s and can reach 128 synchronised channels through the Star-Hub system.
The players
Spectrum Instrumentation
Spectrum Instrumentation is a German manufacturer of high-speed data acquisition and digitiser products used in measurement and test applications.
Vepac Electronics
Vepac Electronics is a distributor of electronic test and measurement products, including the Spectrum Instrumentation digitiser range, and is the source for the new averaging option.
The details
The averaging is performed in the onboard FPGA, a time-domain technique that reduces random, uncorrelated noise in a signal. Averaging 64 times may improve the SNR by as much as 12 dB or increase measurement resolution by around 2 bits.
Timeline
Option becomes available immediately from Vepac Electronics, with new units and field upgrades offered for existing units.
The Tech Race
The option extends the 59xx platform's existing Star-Hub architecture, which already scales PCIe cards to 128 synchronised channels, by moving averaging into onboard hardware. This keeps the company's acquisition systems competitive against rivals offering in-instrument signal processing for high-repetition-rate measurements.
Engineers running high-repetition-rate measurements can average signals inside the instrument rather than on a host PC, reducing the data they must store and process. Existing 59xx owners can add the capability as a field upgrade through Vepac Electronics rather than replacing hardware.
The takeaway
Onboard averaging is worth evaluating for any setup where repeated acquisitions are needed to pull a weak signal out of noise, since it can cut data volume before it reaches the host. Teams with existing 59xx hardware should check whether a field upgrade covers their current measurement workflow before buying new equipment.
Further reading
For more on the chips that power instruments like these, see Semiconductors.
Source note: This article includes information reported by Instrumentation.



