Researchers Tested Fire Safety in Solar Roof Systems

Tests conducted in the Netherlands showed that cement-bonded particle board reduced flame spread on rooftops.

Updated on Sept. 22, 2026 in Energy

Isometric editorial illustration of a solar panel mounted on a cement board, depicting fire-safety material research.
Researchers in the Netherlands concluded a study in April 2025 finding that cement-bonded particle boards effectively limit flame spread in rooftop solar systems. AI Illustration. Upload story photo >

Live Poll

Is it a good time for homeowners to prioritize fire-resistant upgrades for rooftop solar systems?

Researchers concluded a series of fire safety tests in April 2025 at the Troned Training Factory in the Netherlands. The study investigated the impact of 12 mm cement-bonded particle boards on rooftop photovoltaic systems during fire exposure.

Why it matters

The findings are significant because the material absorbs thermal energy, effectively acting as a heat sink that limits heat transfer to underlying insulation. This process helps prevent self-sustained flame spread in rooftop solar arrays.

The seven tests utilized a 15 kW gas burner for 10 minutes to ignite 7 m x 7 m roof assemblies. Researchers integrated a 12 mm cement-bonded particle board between the 1.8 mm PVC membrane and insulation while monitoring heat via up to 30 thermocouples.

The players

Troned Training Factory

This facility located at the Twente Safety Campus serves as a site for safety and emergency response research.

The details

The study utilized varying configurations of photovoltaic modules to determine if the added board effectively suppressed fire. While one test showed that higher wind loads contributed to flame spread, the overall results indicated no significant self-sustained fire beyond the arrays.

Timeline

  1. The testing period commenced at the Troned Training Factory in October 2024.

  2. The research program officially concluded in April 2025.

The Big Picture

This study follows a pattern set by the European standard for fire safety in photovoltaic installations by testing material compatibility under controlled heat exposure. The results offer a new technical baseline for evaluating how roof assemblies mitigate thermal hazards.

These findings could lead to safer, standardized building materials for future residential and commercial solar installations. Developers may use this data to select roofing components that better protect buildings from fire damage during electrical failures.

The takeaway

The addition of specific fire-resistant materials can significantly reduce the risk of catastrophic roof fires. Future solar installations may rely on these heat-sink components to enhance passive safety standards.

Further reading

For more information on innovations in sustainable power, visit the Energy section.

Live Poll

Is it a good time for homeowners to prioritize fire-resistant upgrades for rooftop solar systems?