Battery Design Keeps Power in Cold Temperatures

Researchers report an anodeless all-solid-state pouch cell that retains 87% of its capacity after 250 cycles at 5 °C.

Updated on Nov. 18, 2026 in Energy

Isometric editorial illustration of a flat matte pouch battery beside a frosted cylindrical cold chamber, evoking cold-weather battery engineering.
Researchers report an anodeless all-solid-state battery that keeps 87% of its capacity after 250 cycles at 5 °C, using a brief 45 °C activation step. AI Illustration. Upload story photo >

Researchers demonstrated low-temperature operation of anodeless all-solid-state pouch cells with Ag-C interlayers, a design published early as accepted peer-reviewed research on November 18, 2026. A brief initial charge at 45 °C activates the interlayer, enabling efficient operation at 5 °C.

Why it matters

Anodeless all-solid-state battery operation in cold environments has been limited by poorly understood failure mechanisms. The findings identify the causes of low-temperature capacity decay and offer a activation protocol that addresses them.

The study reports 87% capacity retention after 250 cycles at 5 °C, compared with roughly one-third the discharge capacity of cells cycled under the fixed-temperature protocol. Durability beyond 250 cycles and performance at larger cell formats remain untested in the reported data.

The details

At 5 °C, suppressed Li-Ag alloying slows lithium transport, causing internal lithium extrusion, interlayer delamination, and rapid capacity decay. A brief initial charge at 45 °C permanently activates the Ag-C interlayer through Li-Ag alloy formation, and the researchers used operando X-ray absorption spectroscopy, cryogenic-cross-section electron microscopy, and X-ray diffraction to examine these failure mechanisms.

Timeline

  1. • November 18, 2026: Article published early as accepted peer-reviewed research.

Roadmap

The work extends operando X-ray spectroscopy beyond diagnosis into direct control of solid-state battery interfaces. It builds on the broader push to replace liquid electrolytes and anodes in batteries that must perform in cold climates.

If these cells reach commercial production, they could give electric devices and vehicles more usable power in cold conditions without the bulk of a conventional anode. The current results come from laboratory pouch cells, so consumer availability remains uncertain.

The takeaway

Cold-weather battery performance depends on managing interface chemistry, and a short activation step at moderate heat can preserve capacity over hundreds of cycles. Watch for independent replication before assuming these results apply to commercial cells.

Further reading

Explore more on Energy developments shaping next-generation storage.

Source note: This article includes information reported by Nature.