UC San Diego Robot Runs 4.72 Meters Per Second
The six-legged, 3D-printed soft robot uses no electronics and is more than 100 times faster than the team's 2022 version.
Updated on Nov. 19, 2026 in Tech

Engineers at UC San Diego built a six-legged, 3D-printed soft robot that reaches speeds of up to 4.72 meters per second without any electronics. The research was reported in the November 18, 2026 issue of Science Robotics.
Why it matters
The robot's speed is more than 100 times that of the team's 2022 predecessor, which moved at 4 centimeters per second. The design shows that soft robots built from a single printed material can move quickly and function across varied terrain without electronic control.
The robot has six legs, is printed in one piece from a single material, and uses pressurized air circulated through chambers and valves rather than electronics. Its top speed of 4.72 meters per second was measured against the 2022 predecessor's 4 centimeters per second.
The players
UC San Diego Jacobs School of Engineering
The engineering school at the University of California, San Diego, where the robot was designed and built and the research was conducted.
The details
The robot adapts a compound steam engine design so pressurized air circulates twice, first through smaller high-pressure chambers that power valves and then through larger low-pressure chambers that move the legs. It runs on sand, gravel, lawn, mulch, concrete and stairs, and it can swim and walk underwater.
Timeline
2022: The team developed the first 3D-printed air-powered soft walking robot.
2025: An earlier robot was detailed in an Advanced Intelligent Systems article.
November 18, 2026: The research was reported in Science Robotics.
The Tech Race
The new robot extends the 2022 air-powered walking design from UC San Diego by raising speed more than 100 times without adding electronics. The result places the San Diego program's electronics-free approach against the general push for faster, more capable soft robots.
Researchers plan to develop designs that use less compressed air so the robot can operate untethered with a portable air source. Electronics-free 3D-printed robots could eventually be considered for high-radiation areas, disaster response and space exploration.
The takeaway
A robot with no electronics can now move at speeds once reached only by far more complex machines, suggesting that soft robots may soon handle work in harsh or inaccessible environments. Readers following robotics should watch for the untethered versions the team has said it is pursuing.
Further reading
Explore more on Robotics coverage from the San Diego area.
Source note: This article includes information reported by Eurasia Review.






