Wisevoter

Diavik Mine Installs 3.5-Megawatt Solar Array

Rio Tinto's remote Northwest Territories diamond mine adds solar power to reduce reliance on on-site diesel generation.

Updated on Nov. 18, 2026 in Energy

Rows of dark solar panels on steel racking across cleared rocky subarctic ground with patches of snow and a distant line of spruce under a pale sky.
Rio Tinto has installed a 3.5-megawatt solar array of 6,620 panels at its Diavik Diamond Mine in the Northwest Territories to reduce diesel generation at the off-grid site. AI Illustration. Upload story photo >

Live Poll

Should more remote northern operations switch to solar power despite harsh winters?

Rio Tinto has installed a 3.5-megawatt solar array at the Diavik Diamond Mine in the Northwest Territories, using 6,620 solar panels across roughly 70,000 square metres of cleared rocky land. The mine is not connected to a regional electricity grid, so the array is designed to supply power on site.

Why it matters

Because the mine sits outside any regional grid, power must be generated locally, and the array offers an alternative to fuel-based generation at a remote Northwest Territories operation. The project shows how solar can be deployed in a cold, snow-covered northern setting where panels can capture light reflected from the ground.

The array has a maximum capacity of 3.5 megawatts and is projected to generate 4.2 million kilowatt-hours annually, which could supply up to 25% of the mine's electrical needs during closure. Long-term reliability has not yet been established and will require several years of data.

The players

Rio Tinto

Rio Tinto is a global mining company headquartered in London and Melbourne that operates the Diavik Diamond Mine in partnership with other owners.

Solvest

Solvest is an organization involved in the solar array project at the Diavik Diamond Mine.

The details

The 6,620 dual-glass panels are mounted on steel racking ballasted with rocks, avoiding large concrete foundations. Steel beams, inverters and glass panels were delivered over the winter by ice road, and the racking is angled to capture sunlight reflected from snow during spring and autumn. The system was designed with ballast mounts that allow it to be disassembled easily.

Timeline

  1. Steel beams, inverters and glass panels were delivered over the winter by ice road before installation.

  2. The racking is angled to maximize reflected light in spring and autumn.

Zoom Out

Bifacial dual-glass panels, which harvest light reflected from the ground on their rear face, are gaining use in high-latitude settings where snow reflects strongly. The Diavik array applies that approach to an off-grid industrial site, where diesel generation has long been the default.

For communities and workers in remote northern regions, on-site solar can reduce dependence on fuel shipped in by ice road or air. The project's results over several years will indicate whether similar systems are practical for other off-grid operations.

The takeaway

Off-grid industrial sites in cold climates can add solar generation by using ballasted mounts, dual-glass panels and reflected snow light, though long-term performance data is still needed.

Further reading

For more on regional power planning, see Energy coverage of Northwest Territories power projects.

Source note: This article includes information reported by Ecoportal.

Live Poll

Should more remote northern operations switch to solar power despite harsh winters?