MASPRO Cradle Doubles Percussion Hours in WA Mine
An upgraded feed cradle assembly recorded a 100.6 per cent rise in percussion hours at a Western Australian hard-rock mining operation.
Updated on Nov. 22, 2026 in Industry

MASPRO's upgraded feed cradle assembly recorded a 100.6 per cent increase in percussion hours, rising from a historical average of 985 hours to 1,976 hours. The assembly was installed at a Western Australian hard-rock mining operation on the same jumbo and boom used in previous operations.
Why it matters
Historical cradle records showed cracking and inconsistent service life under scaling and bolting conditions, and premature replacements added maintenance costs and interrupted equipment availability. A longer-lasting component has the potential to reduce the operational effort required across its lifecycle for mining operators in Western Australia.
Percussion hours rose 100.6 per cent, from a historical average of 985 to 1,976 hours, and installed duration rose 61.8 per cent, from 365 to 591 days, compared with four historical cradle installations. The findings rest on a single MASPRO installation, so the sample size is limited.
The players
MASPRO
MASPRO is the manufacturer of the upgraded feed cradle assembly, which is designed for use on mining jumbos and booms.
The details
The upgraded cradle assembly uses upgraded materials and a design aimed at improving fatigue resistance under repetitive bolting loads. It includes a pre-assembled pipe that simplifies installation and reduces fitter preparation time.
Industry Position
The upgraded cradle assembly extends earlier MASPRO cradle designs, which historically showed cracking and inconsistent service life when used on the same jumbo and boom equipment. Longer component life moves mining equipment maintenance toward fewer unplanned replacements.
For Western Australian mining operators, a cradle that lasts longer means fewer unplanned replacements and less interruption to equipment availability. The pre-assembled pipe also reduces the time fitters spend preparing each installation.
The takeaway
Components that resist fatigue under repetitive loads can cut maintenance cost and downtime, so operators weighing replacement schedules should review cradle service records against this performance data.
Further reading
Explore more manufacturing news for Western Australia.
Source note: This article includes information reported by Australian Mining.






