Algal Biochar Shows Promise Against Toxic Metalloids
A review of 152 studies finds the material effective at removing contaminants from water and soil but calls for pilot testing before commercial use.
Updated on Nov. 18, 2026 in Environmental

A review of 152 studies published between 2006 and mid-2026, released in Frontiers in Chemical Engineering, assessed algal biochar for removing metalloids such as arsenic, antimony, selenium and tellurium from contaminated water and soil. The authors concluded the material requires pilot testing and regulatory guidelines before commercial deployment.
Why it matters
Industrial activities such as mining, smelting, fossil fuel combustion and agrochemical use release these persistent metalloids into the environment. A low-cost, bio-based remediation material could offer an alternative to conventional treatments if its performance holds up outside the laboratory.
The review draws on 152 studies, with raw algal biochar adsorbing 5 to 50 mg/g at a processing cost of $0.003 to $0.80/kg compared with $1 to $10/kg for conventional activated carbon. Long-term performance in real contaminated sites remains unresolved, since the authors call for pilot testing before commercial use.
The players
Frontiers in Chemical Engineering
A peer-reviewed open-access journal in the Frontiers publishing family that covers chemical engineering research.
The details
Algal biochar is produced through pyrolysis, hydrothermal carbonization or microwave-assisted carbonization and captures metalloids through electrostatic attraction, surface complexation, ion exchange, mineral precipitation and redox transformations. The review also reports that pairing biochar synthesis with bio-oil extraction lowers energy demand by 62 percent, and that agricultural trials on contaminated soils have tested arsenic immobilization.
Timeline
2006: earliest study included in the review.
Mid-2026: latest study included in the review.
November 18, 2026: article about the review published.
The Big Picture
The review positions algal biochar against conventional activated carbon, which costs $1 to $10 per kilogram, while algal biochar costs as little as $0.003 per kilogram at base processing. Whether the cost advantage holds once modified variants are produced at scale remains to be shown.
If algal biochar performs as the review suggests at scale, it could offer a cheaper option for treating water and soil contaminated by industrial metalloids. Any practical use will depend on the pilot testing and regulatory guidelines the authors call for.
The takeaway
The review suggests algal biochar is a promising, low-cost option for metalloid remediation, but its benefits depend on validation under real field conditions. Readers following environmental remediation should watch for pilot studies and regulatory guidance before assuming commercial availability.
Further reading
Explore more on Environmental research and remediation technologies.
Source note: This article includes information reported by Biochar Today.



