KYOCERA Launches MFH-Raptor-D High-Feed Milling Cutter

The new cutter adds double-sided inserts with eight cutting edges to KYOCERA's MFH high-feed milling series.

Updated on Nov. 16, 2026 in Manufacturing

Close view of a steel milling cutter with a cluster of carbide inserts forming a helical cutting edge on a dark metal workbench with fine shavings.
KYOCERA on November 16, 2026 launched the MFH-Raptor-D, a high-feed milling cutter with double-sided inserts offering eight cutting edges. AI Illustration. Upload story photo >

KYOCERA has launched the MFH-Raptor-D, a new addition to its MFH high-feed milling series, announced on November 16, 2026. The cutter uses double-sided inserts with eight cutting edges and is available in end mill, face mill, and modular configurations.

Why it matters

The launch expands options for high-production machining, where tool design influences cutting speed and tool life. KYOCERA also introduced a second new milling series aimed at the same high-production segment.

KYOCERA's internal simulation showed roughing time cut by approximately 33% against a conventional 45° cutter, with diameters spanning 1.000 to 4.000 inches (25mm to 125mm). The comparison was run by the manufacturer and has not been independently verified.

The players

KYOCERA

KYOCERA is a Japanese advanced ceramics and industrial tools manufacturer with a global presence in cutting tools and machining products.

The details

The MFH-Raptor-D uses a convex helical cutting-edge design that engages the workpiece gradually, reducing cutting forces as each insert enters the cut. KYOCERA reported controlled cutting forces and competitive wear resistance in its internal evaluations, and the lineup includes both inch and metric options.

Timeline

  1. November 16, 2026: KYOCERA announces the launch of the MFH-Raptor-D.

Market Landscape

The MFH-Raptor-D extends KYOCERA's established MFH high-feed milling series into double-sided, eight-edge inserts. It positions the company to compete in high-production face and end milling against other major cutting-tool suppliers.

Machine shops running high-production roughing may find the eight-edge double-sided insert design relevant when evaluating tooling costs per part. Buyers will need to test the MFH-Raptor-D against their own materials and parameters to confirm performance.

The takeaway

Simulation results from a manufacturer are a useful starting point, but tool performance depends on material, speed, and feed. Shops should validate new cutters on their own workpieces before changing production tooling.

Further reading

Explore more Manufacturing coverage for context on industrial machining tools.

Source note: This article includes information reported by Practical Machinist.