DISPLAY VISIONS Releases HMI Modules With Master/Client Mode
The German-made displays can manage sensors directly as Modbus master/client, without a separate PLC.
Updated on Nov. 16, 2026 in Robotics

DISPLAY VISIONS has released HMI modules that operate in master/client mode and manage sensors and input devices without a separate PLC. The series is offered in five screen sizes from 2.8 to 12 inches.
Why it matters
The design targets small automation systems where a PLC-based setup would add unnecessary complexity and cost. Regular HMI devices typically act as Modbus slaves while a PLC runs the control logic.
The displays support Modbus RTU and Modbus TCP over RS-485, LAN, and Wi-Fi/WLAN, and can connect to Arduino and Eaton easyE4 systems as well as PLCs from Allen-Bradley, Beckhoff, Mitsubishi, Rockwell, Schneider Electric, and Siemens. Pricing, availability, and independent benchmarks have not been disclosed.
The players
DISPLAY VISIONS
A German manufacturer of human-machine interface displays for industrial and automation applications.
The details
The HMI modules communicate directly with sensors and connected devices as Modbus master/client, removing the need for a separate control system in small setups. HMI-Designer software for configuring the displays is freely available.
The Tech Race
The modules extend the traditional Modbus role of HMI devices, which have typically acted as slaves or servers under a PLC, by letting the display itself initiate communication as master/client. This reflects a broader push by display makers to simplify small automation designs by consolidating control functions that once required separate hardware.
Engineers building small automation systems could reduce hardware by using one display to handle sensor management instead of adding a separate PLC. The displays connect to a wide range of PLCs and controllers, giving integrators flexibility in choosing platforms.
The takeaway
For small automation projects, consolidating sensor management into the HMI can cut both component count and integration effort. Checking protocol compatibility with existing controllers before committing to a design is a practical first step.
Further reading
Explore more industrial automation coverage in the Robotics section.
Source note: This article includes information reported by Electronics For You - Official Site ElectronicsForU.com.



