Xact Metal, Dyndrite Link Software to PBF-LB Machines

Dyndrite LPBF Pro gains native control of Xact Metal's XM200G laser scanning systems, with XM300G support planned.

Updated on Nov. 12, 2026 in Software

Bold flat-color editorial illustration of a laser scanning mirror above a metal powder bed, with a red curved toolpath sweeping across the surface.
Xact Metal and Dyndrite Corporation said Dyndrite LPBF Pro now gives full laser and scan card control on Xact Metal's XM200G systems, with XM300G support planned. AI Illustration. Upload story photo >

Xact Metal has partnered with Dyndrite Corporation to integrate Dyndrite LPBF Pro software into its PBF-LB machines. The integration gives the software full laser and scan card control on the XM200G and XM200G µHD models.

Why it matters

The integration lets customers program toolpaths directly, rather than relying on approximated straight-line segments, across the systems Xact Metal controls. The collaboration is aimed at small and medium-sized businesses using metal additive manufacturing.

The integration supports per-vector mark, jump and poly delay settings, dynamic setpoint control and pulsing laser commands, with non-linear toolpaths including arcs, Bézier curves and wobble movements. Performance claims such as reduced build times and porosity have not been independently measured in the source material.

The players

Xact Metal

Xact Metal is a State College, Pennsylvania-based maker of PBF-LB metal additive manufacturing machines, including the XM200G and XM300G systems.

Dyndrite Corporation

Dyndrite Corporation is a Seattle, Washington-based software company that develops toolpath and build-preparation software for additive manufacturing.

The details

Dyndrite LPBF Pro sends native arc commands directly to the scanning system and lets customers program stir welding, power ramping and parametric curves. Xact Metal says the goal is to give customers complete freedom over build programming without being restricted by the systems it controls. The companies will demonstrate the integration at Formnext 2026.

Timeline

  1. Formnext 2026 demonstration in Frankfurt, Germany, November 17-20, 2026.

The Tech Race

The integration extends Dyndrite LPBF Pro's native arc-command capability, which avoids approximating curves with straight-line segments, onto Xact Metal's laser scanning hardware. It positions the pairing against build-preparation software that is tied to a single machine maker's control system.

For metal printing shops, the integration means toolpath programming can use arcs, Bézier curves and per-vector delay settings without being limited by the machine maker's control software. Customers on XM200G and XM200G µHD machines can use the integrated software now, while XM300G users must wait for planned support.

The takeaway

Manufacturers evaluating PBF-LB systems can weigh whether open toolpath control matters for their parts, since control over the scanning system determines how much of a build they can program directly. Comparing supported machine models before buying is a practical first step.

Further reading

Explore more Software coverage for context on how toolpath tools are evolving.

Source note: This article includes information reported by Metal Additive Manufacturing.