Ammann Unveils Electric Road Paver With Volvo Penta
The eABG 4820 pairs a 270 kWh battery with a 99 kW motor to replace diesel power in asphalt paving.
Updated on Nov. 10, 2026 in Electric Vehicles

Ammann and Volvo Penta have developed the eABG 4820, an all-electric road paver based on Ammann's diesel-powered ABG 4820 model. The machine runs on a 270 kWh battery and a permanent magnet synchronous motor rated at 99 kW.
Why it matters
Construction equipment is one of the harder sectors to electrify because of heavy power demands and long operating hours. A battery-driven paver offers a path to lower emissions on road-building sites.
The eABG 4820 operates at 600 volts, charges at up to 150 kW DC via CCS2 and up to 22 kW AC, and weighs about 13.8 tonnes without the screed. Its paving capacity is listed at 500 tonnes per hour, with a width range of 2.5 to 6.5 metres and a maximum thickness of 300 millimetres.
The players
Ammann
Ammann is a Swiss manufacturer of road construction equipment, known for its asphalt pavers and compaction machinery.
Volvo Penta
Volvo Penta is the Swedish marine and industrial power systems arm of the Volvo Group, supplying drivetrain and electrical systems.
Dynapac
Dynapac is a Swedish manufacturer of road construction machinery, including compactors and pavers, and is part of the Fayat Group.
The details
Volvo Penta supplied the high-voltage system, and charging is handled through a CCS2 connector. Dynapac also presented the SD25 80C e, a large electric paver with five electric motors producing a combined 235 kW and a 294 kWh battery, at Bauma 2025 in Munich.
Timeline
Bauma 2025 in Munich was the venue where Dynapac presented the SD25 80C e.
Roadmap
Electrification is now reaching heavy construction machinery, not just passenger cars and trucks. Dynapac's SD25 80C e shown at Bauma 2025 and Ammann's eABG 4820 point to a parallel push among paving equipment makers to cut diesel use on job sites.
Contractors evaluating paving equipment may find battery-powered options that reduce diesel fuel use and on-site emissions. Charging needs at job sites will also need to be planned around the machine's 1.5-hour DC fast-charge time.
The takeaway
Battery-electric construction equipment is moving from prototypes to commercial products, and project planners should start considering charging infrastructure alongside machine selection. Emissions savings and operating costs will depend on how well these machines perform on real job sites.
Further reading
For more on the shift to battery power across vehicle types, see Electric Vehicles.



